| Issue Date | Title | Author(s) | Type | Access |
1 | 2020 | Aluminum-to-Steel Cladding by Explosive Welding | Carvalho, Gustavo H. S. F. L. ; Galvão, Ivan ; Mendes, Ricardo ; Leal, Rui M. ; Loureiro, Altino | article | openAccess |
2 | 2020 | Experimental Study on the Surface Properties of Nanoalumina-Filled Epoxy Resin Nanocomposites | Pinto, Deesy; Amaro, Ana M. ; Bernardo, Luís | article | openAccess |
3 | 2020 | Exploiting the biological response of two Serratia fonticola strains to the critical metals, gallium and indium | Caldeira, Joana B. ; Morais, Paula V. ; Branco, Rita | article | openAccess |
4 | 2020 | A Modified Hockett-Sherby Law Enabling the Description of the Thermomechanical Behaviour of the AA6061-T6 | Oliveira, Marta C. ; Germain, Lisa; Laurent, Hervé ; Simões, Vasco M. ; Neto, Diogo M. ; Alves, José L.; Menezes, Luís F. | article | openAccess |
5 | 2020 | Effect of non-zero mean stress bending-torsion fatigue on fracture surface parameters of 34CrNiMo6 steel notched bars | Macek, Wojciech; Szala, Mirosław; Trembacz, Jarosław; Branco, Ricardo ; Costa, José | article | openAccess |
6 | 2020 | Fatigue Crack Growth from Notches: A Numerical Analysis | Borges, Micael Frias ; Caldas, Manuel ; Antunes, Fernando ; Branco, Ricardo Nuno Madeira Soares ; Prates, Pedro André Dias | article | openAccess |
7 | 2020 | Influence of base pressure prior to deposition on the adhesion behaviour of carbon thin films on steel | Boeira, Carla D.; Leidens, Leonardo M.; Michels, Alexandre F.; Serra, Ricardo ; Evaristo, Manuel ; Fernandes, Filipe ; Cavaleiro, Albano ; Figueroa, Carlos A. | article | openAccess |
8 | 2020 | Model-based hardware in the loop control of collaborative robots | Safeea, Mohammad ; Neto, Pedro ; Béarée, Richard | article | openAccess |
9 | 2020 | Task execution combined with in-contact obstacle navigation by exploiting torque feedback of sensitive robots | Safeea, Mohammad ; Neto, Pedro ; Béarée, Richard | article | openAccess |
10 | 2020 | Comparative Analysis of Different Cutting Milling Strategies Applied in Duplex Stainless Steel | Amaro, Paulo; Ferreira, Pedro; Simões, Fernando | article | openAccess |
11 | 2021 | Maintenance Prediction through Sensing Using Hidden Markov Models—A Case Study | Martins, Alexandre; Fonseca, Inácio de Sousa Adelino da ; Farinha, José Torres ; Reis, João; Cardoso, António J. Marques | article | openAccess |
12 | 2021 | Effect of Harsh Environmental Conditions on the Impact Response of Carbon Composites with Filled Matrix by Cork Powder | Silva, Marco P.; Santos, Paulo; Parente, João; Valvez, Sara; Reis, Paulo N. B. | article | openAccess |
13 | 11-Jun-2020 | Nugget Formation and Mechanical Behaviour of Friction Stir Welds of Three Dissimilar Aluminum Alloys | Manuel, Neves ; Galvão, Ivan ; Leal, Rui M. ; Costa, José D. ; Loureiro, Altino | article | openAccess |
14 | 4-Dec-2020 | Revisiting Classical Issues of Fatigue Crack Growth Using a Non-Linear Approach | Borges, Micael F. ; Neto, Diogo M. ; Antunes, Fernando V. | article | openAccess |
15 | 21-Feb-2020 | Mechanical and Tribological Characterization of a Dental Ceromer | Santos, Mariana ; Coelho, Ana Sofia ; Paula, Anabela Baptista ; Marto, Carlos Miguel ; Amaro, Inês ; Saraiva, José ; Ferreira, Manuel Marques ; Antunes, Pedro ; Carrilho, Eunice | article | openAccess |
16 | 2021 | Can a-C:H-Sputtered Coatings Be Extended to Orthodontics? | Frois, António ; Aleixo, Ana Sofia ; Evaristo, Manuel ; Santos, Ana Cristina ; Louro, Cristina | article | openAccess |
17 | 2021 | Influence of Cavity Geometry on the Fracture Strength of Dental Restorations: Finite Element Study | Neto, Maria A. ; Roseiro, Luís ; Messias, Ana ; Falacho, Rui I. ; Palma, Paulo J. ; Amaro, Ana M. | article | openAccess |
18 | 22-Oct-2020 | In Search of the Optimal Conditions to Process Shape Memory Alloys (NiTi) Using Fused Filament Fabrication (FFF) | Carreira, Pedro; Cerejo, Fábio; Alves, Nuno; Vieira, Maria Teresa | article | openAccess |
19 | 25-Sep-2020 | Mechanical Characterization of Multiwalled Carbon Nanotubes: Numerical Simulation Study | Sakharova, Nataliya A. ; Pereira, André F. G. ; Antunes, Jorge M. ; Fernandes, José V. | article | openAccess |
20 | 12-Nov-2020 | Mechanical Characterisation of Single-Walled Carbon Nanotube Heterojunctions: Numerical Simulation Study | Pereira, André F. G. ; Antunes, Jorge M. ; Fernandes, José V. ; Sakharova, Nataliya | article | openAccess |
21 | 2021 | Influence of Local Properties on Fatigue Crack Growth of Laser Butt Welds in Thin Plates of High-Strength Low-Alloy Steel | Riofrío, Patricio G.; Jesus, Joel de ; Ferreira, J. A. M. ; Capela, Carlos | article | openAccess |
22 | 2021 | Seawater Effect on Fatigue Behaviour of Notched Carbon/Epoxy Laminates | Branco, Ricardo ; Reis, Paulo N. B. ; Neto, Maria A. ; Costa, José D. ; Amaro, Ana M. | article | openAccess |
23 | 2021 | Impact Response of Composite Sandwich Cylindrical Shells | Reis, Paulo N. B. ; Coelho, Carlos A. C. P.; Navalho, Fábio V. P. | article | openAccess |
24 | 2020 | A Review on the Importance of Microbial Biopolymers Such as Xanthan Gum to Improve Soil Properties | Mendonça, Amanda ; Morais, Paula V. ; Pires, Ana Cecília ; Chung, Ana Paula ; Oliveira, Paulo Venda | article | openAccess |
25 | 2020 | Influence of Softening Mechanisms on Base Materials Plastic Behaviour and Defects Formation in Friction Stir Lap Welding | Sabari, Sree S. ; Galvão, Ivan ; Leitão, Carlos ; Rodrigues, Dulce Maria | article | openAccess |
26 | 2020 | Mechanical Properties of Sandwich Composites Reinforced by Nanoclays: An Overview | Parente, João; Reis, Paulo N. B. ; Neto, M. ; Amaro, A. M. | article | openAccess |
27 | 2020 | Effect of artificial saliva on the fatigue and wear response of TiAl6V4 specimens produced by SLM | Jesus, J. de ; Borrego, L. P. ; Vilhena, L. ; Ferreira, J. A. M. ; Ramalho, A. ; Capela, C. | article | openAccess |
28 | 2020 | Plantar Pressure Evaluation during the Season in Five Basketball Movements | Amaro, Catarina M. ; Castro, Maria A. ; Roseiro, Luís ; Neto, Maria A. ; Amaro, Ana M. | article | openAccess |
29 | 2020 | Influence of aluminium alloys relative positioning on dissimilar friction stir lap welds properties | Sabari, Sree S. ; Galvão, I. ; Leitão, C. ; Rodrigues, D. M. | article | openAccess |
30 | 2020 | Numerical Study on the Forming Behaviour of Multilayer Sheets | Marques, Armando E. ; Prates, Pedro A. ; Pereira, André F. G. ; Sakharova, Nataliya A. ; Oliveira, Marta C. ; Fernandes, José V. | article | openAccess |
31 | 2020 | Performance Comparison of Parametric and Non-Parametric Regression Models for Uncertainty Analysis of Sheet Metal Forming Processes | Marques, Armando E. ; Prates, Pedro A. ; Pereira, André F. G. ; Oliveira, Marta C. ; Fernandes, José V. ; Ribeiro, Bernardete M. | article | openAccess |
32 | 2020 | Experimental Study on the Flexural Behavior of Alkali Activated Fly Ash Mortar Beams | Lopes, Adelino V. ; Lopes, Sergio M. R. ; Pinto, Isabel | article | openAccess |
33 | 2020 | Issues on the Correlation between Experimental and Numerical Results in Sheet Metal Forming Benchmarks | Amaral, Rui L.; Neto, Diogo M. ; Wagre, Dipak; Santos, Abel D. ; Oliveira, Marta C. | article | openAccess |
34 | 2020 | Cyclic plastic behaviour of 7075 aluminium alloy | Nogueira, F. de Moura ; Cunha, J.; Mateus, A. ; Malça, C.; Costa, J. D ; Branco, R. | article | openAccess |
35 | 2020 | Model for fatigue crack growth analysis | Borges, M. F. M. ; Antunes, F. V. ; Prates, P. ; Branco, R. ; Vasco-Olmo, J. M.; Díaz, F. A. | article | openAccess |
36 | 2020 | Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints | Reis, Paulo N. B. ; Amaro, Ana Paula ; Loureiro, Altino | article | openAccess |
37 | 2020 | Numerical analysis of the bulge test in temperature for the EN AW 6061-T6 sheet | Boyer, A. ; Germain, L.; Laurent, H.; Neto, D. M. ; Oliveira, M. C. | article | openAccess |
38 | 2020 | Mixed mechanical-metrological approach to quantify the fractographic damage in mechanical components subjected to cyclic loading | Macek, Wojciech; Owsiński, Robert; Branco, Ricardo ; Trembacz, Jarosław | article | openAccess |
39 | 2022 | Prediction of multiaxial fatigue life of notched maraging steel components manufactured by selective laser melting | Branco, R. ; Costa, J. D. ; Jesus, J. S. de ; Berto, F.; Ferreira, J. A. Martins ; Capela, C. | article | openAccess |
40 | 2021 | Single overloads FCG modeling considering damage accumulation | Sérgio, E. R. ; Borges, M. F. M. ; Neto, D. M. ; Antunes, F. V. ; Pais, J. P. | article | openAccess |
41 | 2021 | Fracture Resistance of Simulated Immature Teeth Reinforced with Different Mineral Aggregate-Based Materials | Pandolfo, Mariana Travi; Rover, Gabriela; Bortoluzzi, Eduardo Antunes; Teixeira, Cleonice da Silveira; Rossetto, Hebert Luís; Fernades, Paula Cristina Dos Santos Vaz; Côrte-Real, Inês Sansonetty Gonçalves; Carvalho, Sandra Maria Fernandes ; Garcia, Lucas da Fonseca Roberti | article | openAccess |
42 | 2021 | Gastrocnemius Activation throughout the Competitive Season in Athletes of Different Experience Levels | Amaro, Catarina M. ; Castro, Maria António ; Roseiro, Luís ; Mendes, Rui ; Amaro, Ana M. | article | openAccess |
43 | 2021 | Additive Manufacturing | Costa, José; Sequeiros, Elsa; Vieira, M. T. ; Vieira, Manuel | article | openAccess |
44 | 2021 | Fatigue Behavior of Hybrid Components Containing Maraging Steel Parts Produced by Laser Powder Bed Fusion | Santos, Luís ; Jesus, Joel de ; Borrego, Luís ; Ferreira, José A. M. ; Fernandes, Rui F. ; Costa, José D. M. da ; Capela, Carlos | article | openAccess |
45 | 2020 | Impact Welding of Materials | Galvão, Ivan ; Loureiro, Altino ; Mendes, Ricardo | article | openAccess |
46 | 2020 | Development of Metal Powder Hot Embossing: A New Method for Micromanufacturing | Sequeiros, Elsa W.; Emadinia, Omid ; Vieira, Maria Teresa ; Vieira, Manuel Fernando Gonçalves | article | openAccess |
47 | 2020 | Effect of the Substrate Biasing on the Structure and Properties of Tantalum Coatings Deposited Using HiPIMS in Deep Oscillations Magnetron Sputtering Mode | Ferreira, Fábio ; Cavaleiro, Albano ; Oliveira, João | article | openAccess |
48 | 2020 | A Numerical Study of the Effect of Isotropic Hardening Parameters on Mode I Fatigue Crack Growth | Borges, Micael Frias ; Antunes, F. V. ; Prates, P. A. ; Branco, R. | article | openAccess |
49 | 2020 | Characterization of Sintered Aluminium Reinforced with Ultrafine Tungsten Carbide Particles | Emadinia, Omid ; Vieira, Maria Teresa ; Vieira, Manuel Fernando | article | openAccess |
50 | 2021 | Effect of remaining ligament on fatigue crack growth | Jesus, Joel ; Neto, D. M. ; Fernandes, R. F. ; Borges, M. F. ; Antunes, F. V. ; Sérgio, E. R. | article | openAccess |