Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/112231
Título: | Enhancing Polyantimonic-Based Materials’ Moisture Response with Binder Content Tuning | Autor: | Mendes, Sofia Kurapova, Olga Faia, Pedro M. |
Palavras-chave: | humidity sensing; electrical impedance spectroscopy; polyantimonic-based sensors; PVA; model circuit | Data: | 2023 | Editora: | MDPI | Projeto: | FCT scholarship UI/BD/152285/2021 | Título da revista, periódico, livro ou evento: | Chemosensors | Volume: | 11 | Número: | 8 | Resumo: | Humidity sensors are of huge importance in diverse domains. Several types of materials present a moisture-sensing capacity; however, frequently, their electrical response does not display time stability. Due to its high thermal stability, high ionic conductivity, and different conduction mechanism contributing to its overall conductivity, polyantimonic acid (PAA) is seen as a promising material for humidity-sensing devices. In the present work, crystalline PAA was obtained via a simple and safe hydrolysis technique using SbCl3 as a precursor. Bulky sensor samples were produced using different amounts of polyvinyl alcohol (10–20 wt.% PVA) as a binder. The obtained PAA solid sensors were tested at room temperature (RT) in order to evaluate their moisture detection/measuring ability in the relative humidity range 0–100%; the evaluation was carried out with electrical impedance spectroscopy. The sample’s structure and morphology were studied using diverse experimental techniques (porosimetry, scanning electron microscopy, X-ray diffraction analysis, and thermogravimetry analysis, etc.). The sensors’ electrical response was in line with the found structural and morphological features. The slope of the resistance variation with an RH percentage concentration between 1 kW and 1.5 kW was noted for all sensors (showing no changes with time) in the interval between 30 and 100% RH. A good repeatability and reproducibility of the evaluated sensors’ electrical response was observed: the ones that displayed a higher sensitivity were the ones with a high PVA binder content, higher than previously published results for PAA, as well as a very good time stability along the time and low hysteresis. | URI: | https://hdl.handle.net/10316/112231 | ISSN: | 2227-9040 | DOI: | 10.3390/chemosensors11080423 | Direitos: | openAccess |
Aparece nas coleções: | FCTUC Eng.Electrotécnica - Artigos em Revistas Internacionais I&D CEMMPRE - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Enhancing-PolyantimonicBased-Materials-Moisture-Response-with-Binder-Content-TuningChemosensors.pdf | 9.23 MB | Adobe PDF | Ver/Abrir |
Visualizações de página
53
Visto em 9/out/2024
Downloads
31
Visto em 9/out/2024
Google ScholarTM
Verificar
Altmetric
Altmetric
Este registo está protegido por Licença Creative Commons