Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/100812
Título: | A Novel Specimen Produced by Additive Manufacturing for Pure Plane Strain Fatigue Crack Growth Studies | Autor: | Jesus, Joel de Borges, Micael Antunes, Fernando Ferreira, José Reis, Luis Capela, Carlos |
Palavras-chave: | Additive manufacturing; Central crack; Plane strain state; Ti6Al4V; Vacuum | Data: | 2021 | Projeto: | CENTRO-01-0145-FEDER-028789 UIDB/00285/2020 UIDB/50022/2020 |
Título da revista, periódico, livro ou evento: | Metals | Volume: | 11 | Número: | 3 | Resumo: | Fatigue crack growth is usually studied using C(T) or M(T) specimens with throughthickness cracks. The objective of the present study is to propose a cylindrical specimen with central crack, produced by additive manufacturing. This geometry allows to have pure plane strain state along the whole crack front, avoiding the complexities associated with corner points, crack shape, and variation of crack closure along crack front. Additionally, this geometry may be used to develop studies in vacuum, avoiding expensive vacuum equipment, since the air is not in contact with the crack front. Cylindrical specimens of Ti6Al4V titanium alloy were produced by Selective Laser Melting and tested at a stress ratio R = 0. Marking with overloads was the solution adopted to measure the length of the internal cracks. The fracture surfaces presented circular crack fronts and the da/dN-DK curves showed a great influence of atmosphere on fatigue crack growth. An average difference of 50% was found between the results in air and vacuum. Therefore, this geometry with internal crack is an interesting alternative to through-thickness geometries. | URI: | https://hdl.handle.net/10316/100812 | ISSN: | 2075-4701 | DOI: | 10.3390/met11030433 | Direitos: | openAccess |
Aparece nas coleções: | I&D CEMMPRE - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
A-novel-specimen-produced-by-additive-manufacturing-for-pure-plane-strain-fatigue-crack-growth-studiesMetals.pdf | 6.24 MB | Adobe PDF | Ver/Abrir |
Citações SCOPUSTM
5
Visto em 8/jul/2024
Citações WEB OF SCIENCETM
5
Visto em 2/jul/2024
Visualizações de página
138
Visto em 16/out/2024
Downloads
91
Visto em 16/out/2024
Google ScholarTM
Verificar
Altmetric
Altmetric
Este registo está protegido por Licença Creative Commons