Please use this identifier to cite or link to this item:
https://hdl.handle.net/10316/113872
Title: | Reduction in Errors in Roughness Evaluation with an Accurate Definition of the S-L Surface | Authors: | Podulka, Przemysław Macek, Wojciech Branco, Ricardo Nejad, Reza Masoudi |
Keywords: | surface topography; surface texture; roughness; S-L surface; form removal; measurement noise | Issue Date: | 24-Feb-2023 | Publisher: | MDPI | Project: | UIDB/00285/2020 | Serial title, monograph or event: | Materials | Volume: | 16 | Issue: | 5 | Abstract: | Characterization of surface topography, roughly divided into measurement and data analysis, can be valuable in the process of validation of the tribological performance of machined parts. Surface topography, especially the roughness, can respond straightly to the machining process and, in some cases, is defined as a fingerprint of the manufacturing. When considering the high precision of surface topography studies, the definition of both S-surface and L-surface can drive many errors that influence the analysis of the accuracy of the manufacturing process. Even if precise measuring equipment (device and method) is provided but received data are processed erroneously, the precision is still lost. From that matter, the precise definition of the S-L surface can be valuable in the roughness evaluation allowing a reduction in the rejection of properly made parts. In this paper, it was proposed how to select an appropriate procedure for the removal of the L- and S- components from the raw measured data. Various types of surface topographies were considered, e.g., plateau-honed (some with burnished oil pockets), turned, milled, ground, laser-textured, ceramic, composite, and, generally, isotropic. They were measured with different (stylus and optical) methods, respectively, and parameters from the ISO 25178 standard were also taken into consideration. It was found that commonly used and available commercial software methods can be valuable and especially helpful in the precise definition of the S-L surface; respectively, its usage requires an appropriate response (knowledge) from the users. | URI: | https://hdl.handle.net/10316/113872 | ISSN: | 1996-1944 | DOI: | 10.3390/ma16051865 | Rights: | openAccess |
Appears in Collections: | I&D CEMMPRE - Artigos em Revistas Internacionais FCTUC Eng.Mecânica - Artigos em Revistas Internacionais |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Reduction-in-Errors-in-Roughness-Evaluation-with-an-Accurate-Definition-of-the-SL-SurfaceMaterials.pdf | 20.93 MB | Adobe PDF | View/Open |
Page view(s)
93
checked on Oct 9, 2024
Download(s)
22
checked on Oct 9, 2024
Google ScholarTM
Check
Altmetric
Altmetric
This item is licensed under a Creative Commons License