Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/12887
Title: Adhesion failures on hard coatings induced by interface anomalies
Authors: Silva, Carlos W. Moura e 
Alves, E. 
Ramos, A. R. 
Sandu, Cosmin S. 
Cavaleiro, A. 
Keywords: DLC coatings; Adhesion; Contamination layer; Ion cleaning
Issue Date: 16-Jun-2009
Publisher: Elsevier Ltd.
Citation: Vacuum. 83:10 (2009) 1213-1217
Abstract: In this work, the lack of adhesion occurred during the up-scaling of the deposition of tribological coatings in a semi-industrial apparatus is interpreted. The adhesion problems were detected for both hard and self-lubricant coatings from W-Ti-N and W:C systems, respectively, when they were deposited in a 4 cathodes TEER® chamber by reactive unbalanced magnetron sputtering. In spite of cleaning the substrates surface by ion bombardment prior to deposition, by establishing a discharge close to the substrate, insufficient adhesion critical load values were measured by scratch-testing. A powerful set of complementary techniques was used to the detailed analysis of the interfaces in order to understand and overcome the adhesion problems: RBS gave some insights on the nature of the problem by detecting composition anomalies in the substrate/coating interface; Auger spectroscopy was used for identifying the underneath chemical composition close to the interface; cross section TEM gave the final evidence of the presence of a contamination layer attributed to malfunctioning of the ion cleaning process, which was the cause of the lack of adhesion
URI: http://hdl.handle.net/10316/12887
ISSN: 0042-207X
Rights: openAccess
Appears in Collections:FCTUC Eng.Mecânica - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
Adhesion failures on hard coatings induced.pdf468.96 kBAdobe PDFView/Open
Show full item record

Page view(s) 50

273
checked on Oct 16, 2019

Download(s) 50

227
checked on Oct 16, 2019

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.