Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/102245
Título: | Fatigue Performance of Hybrid Steel Samples with Laser Sintered Implants | Autor: | Santos, Luís M. S. Ferreira, J. A. M. Costa, J. D. Capela, C. |
Palavras-chave: | Laser sintering metal; Fatigue; Block loadings; Functional materials | Data: | 2016 | Projeto: | FEDER funds through the program COMPETE and national funds through FCT–Fundação para a Ciência e a Tecnologia, under the project number 016713 (PTDC/EMSPRO/ 1356/2014) | Título da revista, periódico, livro ou evento: | Procedia Engineering | Volume: | 160 | Resumo: | Laser sintering metal has recently been used in the manufacture of metallic structural hybrid components comprising two different materials obtained by two distinct technological processes. This process allows to obtain productivity gains reducing sintering time and hence the cost. In current study it was used a machined substrate in which it is built by sintering the remaining part. The purpose of present work was to study the effect of the substrate material and interface microstructure on the fatigue performance under constant and variable block loadings. The sintering laser parts were manufactured in maraging steel AISI 18Ni300, while the substrates of hybrid specimens were produced alternatively in two materials: the steel for hot work tools AISI H13 and the stainless steel AISI 420. Fatigue strength will be quantified in terms of S - N curves. The results show that tensile properties of sintered specimens and of the hybrid parts was similar. Fatigue strength for short lives, of the sintered specimens and hybrid parts was quite similar. However, the fatigue strength of hybrid parts tends to decrease, for long lives, when compared with single sintered specimens. The fatigue tests under block loadings leads to indicate that the application of Miner’s law is adequate to predate fatigue life in hybrid components with sintered implants, despite having been observed a tendency to be conservative for long life. | URI: | https://hdl.handle.net/10316/102245 | ISSN: | 18777058 | DOI: | 10.1016/j.proeng.2016.08.874 | Direitos: | openAccess |
Aparece nas coleções: | FCTUC Eng.Mecânica - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
1-s2.0-S1877705816331095-main.pdf | 1.78 MB | Adobe PDF | Ver/Abrir |
Citações SCOPUSTM
8
Visto em 9/nov/2022
Citações WEB OF SCIENCETM
8
Visto em 2/mai/2023
Visualizações de página
94
Visto em 16/out/2024
Downloads
28
Visto em 16/out/2024
Google ScholarTM
Verificar
Altmetric
Altmetric
Este registo está protegido por Licença Creative Commons