Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/100611
Título: | 3D Reconstruction of Coastal Cliffs from Fixed-Wing and Multi-Rotor UAS: Impact of SfM-MVS Processing Parameters, Image Redundancy and Acquisition Geometry | Autor: | Gonçalves, Gil Gonçalves, Diogo Gómez-Gutiérrez, Álvaro Andriolo, Umberto Pérez-Alvárez, Juan Antonio |
Palavras-chave: | 3D data gaps; Coastal cliffs; Drones; Point cloud density; SfM‐MVS photogrammetry | Data: | 2021 | Projeto: | info:eu-repo/grantAgreement/FCT/6817 - DCRRNI ID/UIDB/00308/2020/PT/Institute for Systems Engineering and Computers at Coimbra - INESC Coimbra PTDC/EAM-REM/30324/2017 INESC Coimbra (UI0308/UArribaS.1/2020) UIDB/00308/2020 Junta de Extremadura and European Regional Development Fund (ERDF) grant number GR18053 to the Research Group NEXUS (University of Extremadura). |
Título da revista, periódico, livro ou evento: | Remote Sensing | Volume: | 13 | Número: | 6 | Resumo: | Monitoring the dynamics of coastal cliffs is fundamental for the safety of communities, buildings, utilities, and infrastructures located near the coastline. Structure‐from‐Motion and Multi View Stereo (SfM‐MVS) photogrammetry based on Unmanned Aerial Systems (UAS) is a flexible and cost‐effective surveying technique for generating a dense 3D point cloud of the whole cliff face (from bottom to top), with high spatial and temporal resolution. In this paper, in order to generate a reproducible, reliable, precise, accurate, and dense point cloud of the cliff face, a comprehensive analysis of the SfM‐MVS processing parameters, image redundancy and acquisition geometry was performed. Using two different UAS, a fixed‐wing and a multi‐rotor, two flight missions were executed with the aim of reconstructing the geometry of an almost vertical cliff located at the central Portuguese coast. The results indicated that optimizing the processing parameters of Agisoft Metashape can improve the 3D accuracy of the point cloud up to 2 cm. Regarding the image acquisition geometry, the high off‐nadir (90°) dataset taken by the multi‐rotor generated a denser and more accurate point cloud, with lesser data gaps, than that generated by the low off‐nadir dataset (3°) taken by the fixed wing. Yet, it was found that reducing properly the high overlap of the image dataset acquired by the multi‐rotor drone permits to get an optimal image dataset, allowing to speed up the processing time without compromising the accuracy and density of the generated point cloud. The analysis and results presented in this paper improve the knowledge required for the 3D reconstruction of coastal cliffs by UAS, providing new insights into the technical aspects needed for optimizing the monitoring surveys. | URI: | https://hdl.handle.net/10316/100611 | ISSN: | 2072-4292 | DOI: | 10.3390/rs13061222 | Direitos: | openAccess |
Aparece nas coleções: | FCTUC Matemática - Artigos em Revistas Internacionais I&D INESCC - Artigos em Revistas Internacionais FCTUC Eng.Civil - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
3d-reconstruction-of-coastal-cliffs-from-fixedwing-and-multirotor-uas-Impact-of-sfmmvs-processing-parameters-image-redundancy-and-acquisition-geometryRemote-Sensing.pdf | 51.86 MB | Adobe PDF | Ver/Abrir |
Citações SCOPUSTM
38
Visto em 20/mai/2024
Citações WEB OF SCIENCETM
32
Visto em 2/jun/2024
Visualizações de página
104
Visto em 28/ago/2024
Downloads
61
Visto em 28/ago/2024
Google ScholarTM
Verificar
Altmetric
Altmetric
Este registo está protegido por Licença Creative Commons