Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/95896
Title: Energy Performance of 3D-Printed Concrete Walls: A Numerical Study
Authors: Suntharalingam, Thadshajini
Upasiri, Irindu
Gatheeshgar, Perampalam
Poologanathan, Keerthan
Nagaratnam, Brabha
Santos, Paulo
Rajanayagam, Heshachanaa
Keywords: 3D-printed concrete; Energy performance; Finite element modelling; Sustainability; U-value
Issue Date: 2021
Serial title, monograph or event: Buildings
Volume: 11
Issue: 10
Abstract: Three-dimensional-printed concrete (3DPC), which is also termed as digital fabrication of concrete, offers potential development towards a sustainable built environment. This novel technique clearly reveals its development towards construction application with various global achievements, including structures such as bridges, houses, office buildings, and emergency shelters. However, despite the enormous efforts of academia and industry in the recent past, the application of the 3DPC method is still challenging, as existing knowledge about its performance is limited. The construction industry and building sectors have a significant share of the total energy consumed globally, and building thermal efficiency has become one of the main driving forces within the industry. Hence, it is important to study the thermal energy performance of the structures developed using the innovative 3DPC technique. Thermal characterization of walls is fundamental for the assessment of the energy performance, and thermal insulation plays an important role in performance enhancements. Therefore, in this study, different wall configurations were examined, and the conclusions were drawn based on their relative energy performance. The thermal performance of 32 different 3DPC wall configurations with and without cavity insulation were traced using validated finite element models by measuring the thermal transmittance value (U-value). Our study found that the considered 3DPC cavity walls had a low energy performance, as the U-values did not satisfy the standard regulations. Thus, their performance was improved with cavity insulation. The simulation resulted in a minimum thermal transmittance value of 0.34 W/m2·K. Additionally, a suitable equation was proposed to find the U-values of 100 mm-thick cavity wall panels with different configurations. Furthermore, this study highlights the importance of analytical and experimental solutions as an outline for further research. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article.
URI: http://hdl.handle.net/10316/95896
ISSN: 2075-5309
DOI: 10.3390/buildings11100432
Rights: openAccess
Appears in Collections:I&D ISISE - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
buildings-11-00432.pdf13.14 MBAdobe PDFView/Open
Show full item record

Google ScholarTM

Check

Altmetric

Altmetric


This item is licensed under a Creative Commons License Creative Commons