Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/95116
Title: Bi-Phasic Ag-In-Ga-Embedded Elastomer Inks for Digitally Printed, Ultra-Stretchable, Multi-layer Electronics
Authors: Lopes, Pedro Alhais
Fernandes, Daniel Félix
Silva, André F
Marques, Daniel Green
Almeida, Aníbal T. de 
Majidi, Carmel
Tavakoli, Mahmoud 
Keywords: Printed stretchable electronics; Soft and flexible electronics; Eutectic gallium−indium alloy; Conductive stretchable ink; Styrene-isoprene block copolymers (SIS); Styrene block copolymer; Bi-phasic conductive ink; EGaIn-Ag
Issue Date: 31-Mar-2021
Publisher: American Chemical Society
Serial title, monograph or event: ACS Applied Materials and Interfaces
Volume: 13
Issue: 12
Abstract: A bi-phasic ternary Ag-In-Ga ink that demonstrates high electrical conductivity, extreme stretchability, and low electromechanical gauge factor (GF) is introduced. Unlike popular liquid metal alloys such as eutectic gallium-indium (EGaIn), this ink is easily printable and nonsmearing and bonds strongly to a variety of substrates. Using this ink and a simple extrusion printer, the ability to perform direct writing of ultrathin, multi-layer circuits that are highly stretchable (max. strain >600%), have excellent conductivity (7.02 × 105 S m-1), and exhibit only a modest GF (0.9) related to the ratio of percent increase in trace resistance with mechanical strain is demonstrated. The ink is synthesized by mixing optimized quantities of EGaIn, Ag microflakes, and styrene-isoprene block copolymers, which functions as a hyperelastic binder. When compared to the same composite without EGaIn, the Ag-In-Ga ink shows over 1 order of magnitude larger conductivity, up to ∼27× lower GF, and ∼5× greater maximum stretchability. No significant change over the resistance of the ink was observed after 1000 strain cycles. Microscopic analysis shows that mixing EGaIn and Ag microflakes promotes the formation of AgIn2 microparticles, resulting in a cohesive bi-phasic ink. The ink can be sintered at room temperature, making it compatible with many heat-sensitive substrates. Additionally, utilizing a simple commercial extrusion based printer, the ability to perform stencil-free, digital printing of multi-layer stretchable circuits over various substrates, including medical wound-dressing adhesives, is demonstrated for the first time.
URI: http://hdl.handle.net/10316/95116
ISSN: 1944-8244
1944-8252
DOI: 10.1021/acsami.0c22206
Rights: embargoedAccess
Appears in Collections:I&D ISR - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
manuscript Bi-Phasic Ag-In-Ga Embedded Elastomer inks for Digitally.pdf9.14 MBAdobe PDFView/Open
Show full item record

WEB OF SCIENCETM
Citations

20
checked on Aug 2, 2022

Page view(s)

124
checked on Sep 14, 2022

Download(s)

100
checked on Sep 14, 2022

Google ScholarTM

Check

Altmetric

Altmetric


This item is licensed under a Creative Commons License Creative Commons