Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/4323
Title: Use of ultramicroindentation to evaluate the degradation of sputtered coatings
Authors: Cavaleiro, A. 
Louro, C. 
Fernandes, J. V. 
Brett, C. M. A. 
Issue Date: 1999
Citation: Vacuum. 52:1-2 (1999) 157-162
Abstract: The aim of this research work was to study the influence of chemical degradation on the mechanical properties of the non-degraded zones of sputtered W-N-Ti coatings. For this, an ultramicroindentation technique has been used before and after degradation, either on the zones between the pits in the corroded samples, or on the non-oxidised layers after removal of the top degraded layers. By using different applied loads it was possible to obtain results with and without the influence of the substrate. Thus, two types of results were obtained, those determined by using an empirical model, which eliminates the influence of the substrate, and those measured directly.Very small differences of less than 20% were obtained in the measured values before and after degradation, indicating that the non-degraded zones maintain their as-deposited mechanical properties.
URI: http://hdl.handle.net/10316/4323
Rights: openAccess
Appears in Collections:FCTUC Eng.Mecânica - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
file662dbeeac07e4c9ab77510c13992c070.pdf6.12 MBAdobe PDFView/Open
Show full item record

Page view(s) 50

329
checked on Oct 16, 2019

Download(s)

143
checked on Oct 16, 2019

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.