Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/4307
Title: Further development of the hybrid model for polycrystal deformation
Authors: Fernandes, J. V. 
Vieira, M. F. 
Keywords: Mechanical properties (constitutive equations); Dislocations (theory)
Issue Date: 2000
Citation: Acta Materialia. 48:8 (2000) 1919-1930
Abstract: The Kocks-Mecking hybrid model for polycrystal deformation has been developed further, in order to obtain an easy definition of polycrystalline behaviour, from knowledge of the single crystal stress-strain curves. The hybrid model is a one-parameter theory that considers the flow stress governed by total dislocation density. This is the addition of the statistically stored dislocations, independent of the grain size, and the geometrical dislocations, necessary to accommodate the deformation, and thus dependent on the grain size (as proposed by Ashby). The condition for the onset of necking is used to determine the parameters of the equation of the model. The analytical description of the resulting flow law was used to analyse the tensile behaviour of copper sheets, with five different grain sizes, which were deformed at three different strain rates.
URI: http://hdl.handle.net/10316/4307
Rights: openAccess
Appears in Collections:FCTUC Eng.Mecânica - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
file5cbf2ed965e24447ac01d772fabdfc69.pdf469.81 kBAdobe PDFView/Open
Show full item record

Page view(s) 50

357
checked on May 19, 2020

Download(s) 50

379
checked on May 19, 2020

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.