Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/4194
Title: Fatigue behaviour of laser repairing welded joints
Authors: Borrego, L. P. 
Pires, J. T. B. 
Costa, J. M. 
Ferreira, J. M. 
Keywords: Mould producing; Laser repairing; Welded joints; Fatigue
Issue Date: 2007
Citation: Engineering Failure Analysis. 14:8 (2007) 1586-1593
Abstract: This paper presents a fatigue study in Nd-YAG laser surface repairing welded joints in specimens of two base materials used in mould production. The tests were carried out in a servo-hydraulic machine in tension, under constant amplitude loading, with two stress ratios R = 0 and R = 0.4. Welded specimens were prepared with U notches and filled with laser welding deposits. The fatigue results are presented in the form of S-N curves obtained in welded and non-welded conditions. Complementary measurements of hardness and residual stresses profiles were carried out along the surface of laser welded specimens to understand the observed fatigue behaviour. The melted material was the weaker region, with lower values of hardness and higher tensile residual stresses, presenting also a high number of defects that are potential failure sites. The presence of such defects can explain the relatively poor fatigue strength of the laser repairing joints in comparison to base materials.
URI: http://hdl.handle.net/10316/4194
Rights: openAccess
Appears in Collections:FCTUC Eng.Mecânica - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
file787673f79ac84b71ab8b7c9659b66a4d.pdf578.24 kBAdobe PDFView/Open
Show full item record

Page view(s) 20

490
checked on Dec 4, 2019

Download(s)

81
checked on Dec 4, 2019

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.