Please use this identifier to cite or link to this item: https://hdl.handle.net/10316/83308
DC FieldValueLanguage
dc.contributor.advisorCosta, José Joaquim da-
dc.contributor.advisorPanão, Miguel Rosa Oliveira-
dc.contributor.authorBrandão, Cláudio Neves Barra-
dc.date.accessioned2018-12-22T19:17:08Z-
dc.date.available2018-12-22T19:17:08Z-
dc.date.issued2017-07-24-
dc.date.submitted2019-01-21-
dc.identifier.urihttps://hdl.handle.net/10316/83308-
dc.descriptionDissertação de Mestrado Integrado em Engenharia Mecânica apresentada à Faculdade de Ciências e Tecnologia-
dc.description.abstractAo longo dos anos tem surgido vários desenvolvimentos e tentativas de criar tecnologias de arrefecimento baseadas na mudança de fase. A maior parte dos desenvolvimentos nesta área foram feitos com recurso à mudança de fase por vaporização, isto é, à mudança de fase entre líquido e vapor. No entanto, pouco tem sido explorado em relação à mudança de fase entre sólido e vapor, também conhecido por sublimação. A formação de partículas sólidas de dióxido de carbono, também conhecido por gelo seco, é feita com recurso ao efeito Joule-Thompson. Um fenómeno que permite o arrefecimento do dióxido de carbono, através da descida abrupta de pressão ao passar por um pequeno orifício e que consequentemente, devido à mudança de fase, resulta num jato de mistura bifásica sólido-gás a baixas temperaturas. Deste modo, formam-se partículas de gelo seco que, devido à baixa temperatura, irão mudar de fase sólida para vapor e contribuir para o arrefecimento em contacto com a superfície, aliado ao arrefecimento inerente da convecção das baixas temperaturas do jato.No âmbito desta dissertação, concebeu-se uma instalação experimental com o objetivo de estudar o arrefecimento provocado por um jato de partículas de dióxido de carbono, de modo mais preciso, tendo como variáveis independentes o ângulo de inclinação da placa e o tempo de incidência do jato.Os ensaios realizados revelaram a influência do ângulo de inclinação da placa em relação à horizontal, no processo de arrefecimento com jato de dióxido de carbono, onde se obteve fluxos de calor e coeficientes de convecção médios superiores para ângulos da placa nulos, havendo uma forte variação dos valores locais com a variação da distância ao centro da placa. Os resultados evidenciaram um processo de arrefecimento com eficiências a variar entre 6,39% e 11,59%.por
dc.description.abstractAlong the years there have been a significative amount of development and attempts to create cooling technologies based on the phase change. Most of the development in this area were made with the vaporization phase change, in other words, the phase change between liquid and vapor. However, little has been explored in relation to the phase change between solid and vapor, also known as sublimation.The formation of solid particles of carbon dioxide, also known as dry ice, is made using the Joule-Thompson effect. A phenomenon which allows the cooling of carbon dioxide through the abrupt drop of pressure as it passes through a small orifice and which consequently, due to the phase change, results in a solid-gas biphasic mixing jet at low temperatures. Thus, dry ice particles are formed which, due to the low temperatures, will change from solid to vapor phase and contribute to the cooling in contact with a surface, together with the inherent cooling of the convection of the low temperature jet.As part of this work, an experimental setup was designed aiming the study of the cooling caused by a jet of carbon dioxide particles with more accuracy, having as independent variables the angle and time of incidence of the jet.The tests showed the influence of the slab angle in relation to the horizontal in the cooling process with carbon dioxide jet blasting, where upper average heat fluxes and convection coefficients were obtained for null slab angles, with a strong variation of the local values with the variation of the distance to the center of the slab. The results showed a cooling process with efficiencies ranging from 6.39% to 11.59%.eng
dc.language.isopor-
dc.rightsopenAccess-
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/-
dc.subjectArrefecimentopor
dc.subjectSublimaçãopor
dc.subjectGelo secopor
dc.subjectJatopor
dc.subjectCoolingeng
dc.subjectSublimationeng
dc.subjectDry iceeng
dc.subjectJeteng
dc.titleArrefecimento de superfícies com jato de partículas de neve carbónicapor
dc.title.alternativeSurface cooling with dry ice jeteng
dc.typemasterThesis-
degois.publication.locationDepartamento de Engenharia Mecânica da Universidade de Coimbra-
degois.publication.titleArrefecimento de superfícies com jato de partículas de neve carbónicapor
dc.peerreviewedyes-
dc.identifier.tid202121720-
thesis.degree.disciplineEngenharia Mecânica-
thesis.degree.grantorUniversidade de Coimbra-
thesis.degree.level1-
thesis.degree.nameMestrado Integrado em Engenharia Mecânica-
uc.degree.grantorUnitFaculdade de Ciências e Tecnologia - Departamento de Engenharia Mecânica-
uc.degree.grantorID0500-
uc.contributor.authorBrandão, Cláudio Neves Barra::0000-0002-1049-5532-
uc.degree.classification17-
uc.degree.presidentejuriRibeiro, José Manuel Baranda Moreira da Silva-
uc.degree.elementojuriGaspar, Adélio Manuel Rodrigues-
uc.degree.elementojuriPanão, Miguel Rosa Oliveira-
uc.contributor.advisorCosta, José Joaquim da-
uc.contributor.advisorPanão, Miguel Rosa Oliveira-
item.openairetypemasterThesis-
item.languageiso639-1pt-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextCom Texto completo-
crisitem.advisor.researchunitLAETA - Associated Laboratory for Energy, Transports and Aeronautics-
crisitem.advisor.researchunitADAI - Association for the Development of Industrial Aerodynamics-
crisitem.advisor.orcid0000-0002-7015-6989-
Appears in Collections:UC - Dissertações de Mestrado
Files in This Item:
File Description SizeFormat
Claudio_Brandao_MSc_FINALs.pdf6.55 MBAdobe PDFView/Open
Show simple item record

Page view(s) 50

529
checked on Mar 26, 2024

Download(s) 50

530
checked on Mar 26, 2024

Google ScholarTM

Check


This item is licensed under a Creative Commons License Creative Commons