Please use this identifier to cite or link to this item: https://hdl.handle.net/10316/42852
Title: CFD simulation of the turbulent flow of pulp fibre suspensions
Authors: Ventura, C. A. F. 
Garcia, F. A. P. 
Ferreira, P. J. 
Rasteiro, M. G. 
Keywords: Pulp fibre flow; K-ε model; CFD simulation; Turbulence; COMSOL multiphysics
Issue Date: 2008
Citation: Ventura, C. A. F., Garcia, F. A. P., Ferreira, P. J., Rasteiro, M. G. (2008). CFD simulation of the turbulent flow of pulp fibre suspensions. Proc. 2008 AIChE Annual Meeting, Philadelphia, USA (pres. 292 b, 11 pp.).ISBN 978-0-8169-1050-2.
Serial title, monograph or event: Proceedings 2008 AIChE Annual Meeting
Place of publication or event: Philadelphia
Abstract: Pulp fibre suspensions are complex solid-liquid systems, since their components (fibre, flocs, additives…) present singular and complex interactions between them. As a consequence of this complexity, the understanding of the suspensions flow dynamics remains poor and incomplete, what usually leads to a conservative industrial equipment design and, hence, equipment oversizing. The purpose of this study is to obtain further knowledge about the dynamic mechanisms of the turbulent flow regime of industrial pulp suspensions, by producing and testing the viability of a model for the turbulent flow of fibre suspensions in conveying pipes, based on fundamental principles of conservation, and also on some experimental information (namely the rheological information) to adjust, empirically, unknown parameters as the fluid viscosity. With this purpose a numerical model was developed, based on a CFD code, using the Chemical Engineering module of COMSOL Multiphysics Software version 3.4. The K −ε Turbulence Model was chosen to simulate the pulp suspensions flow. Additionally, the final model was tested and validated using four different industrial pulp suspensions, which were previously fully studied experimentally (flow and rheological tests). The obtained results demonstrated that the pressure drop profiles obtained using COMSOL Multiphysics Software, for the turbulent flow regime, agree very well with the experimental results obtained in a pilot rig. Additionally, the use of the k −ε Turbulence Model for the simulation of pulp fibre suspensions flow, associated with the rheological data acquired experimentally, revealed to be a prompt and accurate strategy to attain good prediction of pressure drop values for fibre suspensions flow. Moreover, the adjustment of the turbulence parameters confirmed previous studies’ results, where it was concluded that the existence of particles, such as fibres, in a fluid flow, induces a turbulence damping.
URI: https://hdl.handle.net/10316/42852
ISBN: 978-0-8169-1050-2
Rights: openAccess
Appears in Collections:FCTUC Eng.Química - Artigos em Livros de Actas

Files in This Item:
File Description SizeFormat
2008 AIChE Annual Meeting - 2.pdf262.91 kBAdobe PDFView/Open
Show full item record

Page view(s) 50

516
checked on Mar 26, 2024

Download(s)

111
checked on Mar 26, 2024

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.